background image

24

23. Legal information

These operating instructions contain all the information required
for using, operating and maintaining the machine properly. 
Knowledge of and compliance with the specifications contained in
these operating instructions is required for using the machine safely
as well as for operational safety and safety during maintenance.
These operating instructions cannot cover any conceivable appli-
cation. The machine was designed for private household use.
Additionally we point out that the content of these operating
instructions does not form part of any previous or existing agree-
ment, consent or al legal relationship nor does it constitute a
change of such an agreement, consent or legal relationship. Any
obligations to be fulfilled by Jura Elektroapparate AG are stipu-
lated in the corresponding purchase contract, which also contains
the full and solely applicable warranty stipulations. These con-
tractual warranty stipulations are neither extended nor limited by
the specifications contained in these operating instructions.
The operating instructions contain information, protected by Copy-
right. Photocopying or translations into other languages shall not be
permissible without Jura Elektroapparate AG’s written approval.

24. Technical Data

Voltage:

230V AC

Power:

1450 W

Fuse:

10 A

Safety check: 

Energy consumption Standby:

approx. 3.5 Wh

Energy consumption 
«Ready for draw-off» mode:

approx. 11.5 Wh

Pump pressure:

static, max. 15 bar

Water tank:

1.9 litres

Bean tank capacity:

200gr.

Coffee grounds container capacity :

max. 16 portions

Length of cable:

approx. 1.1 m

Weight:

9.1 kg

Size (WxHxD):

28 x 34.5 x 43.5 cm

The machine complies with the following EU directives:

73/23/EWG dated 19/02/1973 "Low Voltage Directive" including
Modification Directive 93/336/EWG

89/336/EWG dated 03/05/1989 "EMC Directive" including 
Modification Directive 92/31/EWG

Summary of Contents for IMPRESSA F5

























Reviews: