14
14. Switching off the IMPRESSA F50/F5
READY
Switch off the IMPRESSA F50/F5 using the ON/OFF key
(3).
RINSING
An automatic rinsing operation is started.
15. Programming
When your IMPRESSA F50/F5 leaves the factory it is ad-
justed such that you can draw off coffee without having to
change any settings. However, you can programme various
parameters individually.
You can programme the following stages:
Filter
Water hardness
Aroma
Temperature
Time
Automatic switch-on time
Automatic switch-off time
Draw-offs
Language
Programming key
(4)
Use the programming key
(4) to open or quit the
programming mode (no saving of values effected).
Rotary switch
Turn the rotary switch to change the adjusted values or to
select the next programming step.
Press the rotary switch to check the values adjusted or to
save the values selected
15.1 Programming the filter
Refer to Chapter 5.1 «Inserting the filter».
15.2 Programming the water hardness
Refer to Chapter 4 «Adjusting the water hardness».
15.3 Programming the aroma INTENSIVE
or STANDARD
When the machine leaves the factory, the aroma is set to
intensive. If requested it can also be set to Standard.
READY
Press programming key
(4) until
FILTER appears.
The illuminated ring (2) is active.
Turn the rotary switch (1) until Aroma is displayed.
AROMA
Press the rotary switch (1).
INTENSIVE
Turn the rotary switch (1) until the following message is dis-
played:
STANDARD
To confirm the new aroma settings, press the rotary switch (1).
AROMA
Press the programming key
(4) to quit the programming
mode or select the next programming item using the rotary
switch (1).
READY
