background image

19

If the water tank shows signs of scaling, remove the scaling
using a commercial de-scaling agent. Take out the water
tank (Fig. 4).

Remove the Claris filter cartridge, if installed, before de-
scaling the water tank. 

16.9 Emptying the system

Precondition:

IMPRESSA F50/F5 

switched off

This operation is required to protect the IMPRESSA F50/F5
against frost damage during transports.

Place a container under the replaceable hot water nozzle (16).

Press the steam preselection key 

(8) until the following

message is displayed:

OPEN TAP

EMPTYING

CLOSE TAP

The IMPRESSA F50/F5 is switched off.

17. Cleaning

Your IMPRESSA F50/F5 features an integrated cleaning program.
The cleaning operation will take some 15 min.

Only use Jura cleaning tablets. These are available at your
local dealer.

Once started, the de-scaling operation must not be inter-
rupted!

After each cleaning operation the filler funnel for pre-ground
coffee should be cleaned (11). 

READY
CLEAN

Press the maintenance key 

(7) until the following message is

displayed:

EMPTY
TRAY

Empty the tray

NO
TRAY

Insert the tray again.

Remove the drip grate (19). 

Put a container (1 l, FIG. 12) under the adjustable coffee spout
(17).

PRESS
MAINT.

Press the maintenance key 

(7).

CLEANING

FILL
TABLET

Fill in the tablet (see FIG 15)

PRESS
MAINT. 

Press the maintenance key 

(7).

CLEANING

EMPTY
TRAY

NO 
TRAY

READY

The cleaning operation was completed successfully.

E

Summary of Contents for IMPRESSA F5

























Reviews: