background image

18

16.3 Drip tray missing

NO
TRAY

If this information is displayed, the drip tray (20)  is not installed
properly or was not installed at all.

Insert the drip tray (20).

READY

16.4 Fill coffee beans

FILL
BEANS

Refill beans as described in Chapter 2.4.

The message REFILL BEANS will disappear after you draw
off your next cup of coffee.

We recommend that you clean the bean tank regularly before
refilling beans, using a dry cloth.  Before cleaning the tank,
switch off the IMPRESSA F50/F5.

16.5 Replacing the filter

After drawing off 50 litres or after 2 months, the filter
cartridge will be used up. If the IMPRESSA F50/F5 is dis-
connected from power supply, the time is not measured. A
message requesting you to replace the filter will appear on
the display.

Refer to Chapter 5.2 «Replacing the filter».

16.6 Cleaning the IMPRESSA F50/F5

After 200 draw-off operations or after 160 rinsing operations, the
IMPRESSA F50/F5 must be cleaned. A message appears on the
display, telling you to start the cleaning programme. You can still
draw off coffee or hot water/steam. However, we recommend that
you should clean the machine (Chapter 17) within the next few
days.

READY
CLEAN

16.7 IMPRESSA F50/F5 calcified

During operation, the machine will calcify. The degree of scaling
depends on the hardness of the water in your region. The machine
will inform you when de-scaling is required. You can still draw off
coffee or hot water/steam. However, we recommend that you
should de-scale the machine (Chapter 18) within the next few days.

READY
CALCIFIED

16.8 General cleaning instructions

Never use scratching objects, pan cleaners, cleaning sponges or
caustic chemicals to clean the machine.

Wipe off the case on the inside and outside using a soft, moist
cloth.

Clean the replaceable hot water nozzle after each use.

After heating milk, draw off some hot water, to clean the inside
of the replaceable steam/frothing nozzle, too.

Disassemble the steam/frothing nozzle for proper cleaning
(Fig. 6).

The water tank should be rinsed daily and refilled with fresh
water.

Summary of Contents for IMPRESSA F5

























Reviews: