Jura GIGA X8 Professional, Instructions For Use Manual

Page: 31 / 58

31
4 Permanent settings in programming mode
T Move your finger across the display until ‘Water hardness’ is
displayed in the center.
T Touch ‘Water hardness’ .
‘Water hardness’
T Now move your finger to the left or right to change the
setting.
T Touch ‘Save’ .
‘Saved’ appears briefly on the display.
‘Water hardness’
T
Touch ‘Back’ the number of times needed to display the start
screen again.
You can change the unit for the amount of water as well as the time
format in programming mode (
‘Machine settings’ / ‘Units’ ):
U
‘Change units’ ( ‘ml’ / ‘oz’ )
U
‘Set time format’ ( ‘24 hrs.’ / ‘AM / PM’ )
Example: Proceed as follows to change the unit for the amount of
water from ‘ml’ to ‘oz’ .
Precondition: The start screen is displayed.
T
Touch ‘ P ’ .
‘Maintenance status’
T
Turn the Rotary Switch until ‘Machine settings’ is displayed.
T Press the Rotary Switch.
‘Machine settings’
T Press the Rotary Switch.
‘Switch off after’
T Move your finger across the display until ‘Units’ is displayed
in the center.
T Touch ‘Units’ .
‘Units’
T Now move your finger to the left or right to change the
setting to ‘oz’ .
T Touch ‘Save’ .
‘Saved’ appears briefly on the display.
‘Units’
T
Touch ‘Back’ the number of times needed to display the start
screen again.
Unit for amount of
water / time format