Jura GIGA X8 Professional, Instructions For Use Manual

Page: 28 / 58

28
4 Permanent settings in programming mode
T
Touch ‘ P ’ .
‘Maintenance status’
T Turn the Rotary Switch until ‘Machine settings’ is displayed.
T Press the Rotary Switch.
‘Machine settings’
T Press the Rotary Switch.
‘Switch off after’
T Turn the Rotary Switch until ‘Set consistency of grind’ is dis-
played.
T Press the Rotary Switch.
‘Left grinder’
T Touch ‘Save’ .
‘Right grinder’
T Turn the Rotary Switch to change the setting.
T Touch ‘Save’ .
‘Saved’ appears briefly on the display.
‘Set consistency of grind’
T Touch ‘Back’ the number of times needed to display the
start screen again.
By instructing your GIGA to automatically switch itself off, you can
cut down your energy consumption. If this function is activated,
your GIGA switches off automatically after the preset time following
the last action on the machine.
You can set the automatic switch-off to 15 minutes, 30 minutes or
1 – 15 hours.
Precondition: The start screen is displayed.
T
Touch ‘ P ’ .
‘Maintenance status’
T
Turn the Rotary Switch until ‘Machine settings’ is displayed.
T Press the Rotary Switch.
‘Machine settings’
T Press the Rotary Switch.
‘Switch off after’
T Now move your finger to the left or right to change the
switch-off time.
Automatic switch-off