Jura GIGA X8 Professional, Instructions For Use Manual

Page: 34 / 58

34
4 Permanent settings in programming mode
T Move your finger across the display until ‘Choose language’
is displayed in the center.
T Touch ‘Choose language’ .
‘Choose language’
T Move your finger across the display until the desired
language, e.g. ‘Deutsch’ , is displayed in the center.
T Touch ‘Save’ .
‘Enregistrer’ appears briefly on the display.
‘Langue’
T
Touch ‘Retour’ the number of times needed to display the
start screen again.
In the program item ‘Machine settings’ / ‘Display’ you can set the
display brightness (as a percentage).
Precondition: The start screen is displayed.
T
Touch ‘ P ’ .
‘Maintenance status’
T
Turn the Rotary Switch until ‘Machine settings’ is displayed.
T Press the Rotary Switch.
‘Machine settings’
T Press the Rotary Switch.
‘Switch off after’
T Move your finger across the display until ‘Display’ is
displayed in the center.
T Touch ‘Display’ .
‘Display’
T Now move your finger to the left or right to change the
setting.
T Touch ‘Save’ .
‘Saved’ appears briefly on the display.
‘Display’
T Touch ‘Back’ the number of times needed to display the
start screen again.
In the program item ‘Machine settings’ / ‘Factory setting’ the
machine can be reset to its factory setting:
All user settings
(apart
from the ‘water hardness’) are reset to factory settings. Your GIGA
then switches off.
Display brightness
Restore factory settings