Jura GIGA X8 Professional, Instructions For Use Manual

Page: 33 / 58

33
4 Permanent settings in programming mode
U
‘Rotary Selection’ :
Product selector view
with additional
products can be started by turning the Rotary Switch.
U
‘Alarm displays’ : The start screen displays messages such as
‘Clean machine’ or ‘Clean the milk system’ .
Example: Proceed as follows to prevent one-off settings being
made during preparation.
Precondition: The start screen is displayed.
T Touch ‘ P ’ .
‘Maintenance status’
T Turn the Rotary Switch until ‘Machine settings’ is displayed.
T Press the Rotary Switch.
‘Machine settings’
T Press the Rotary Switch.
‘Switch off after’
T Turn the Rotary Switch until ‘Lock/enable’ is displayed.
T Press the Rotary Switch.
‘Lock/enable’
T Touch ‘One-off settings’ .
‘One-off settings’
T Now move your finger across the controller to close the lock
symbol.
T
Touch ‘Save’ .
‘Saved’ appears briefly on the display.
‘Lock/enable’
T Touch ‘Back’ the number of times needed to display the
start screen again.
In this program item you can set the language used by your GIGA.
Example: Proceed as follows to change the language from ‘English’
to ‘Français’ .
Precondition: The start screen is displayed.
T
Touch ‘ P ’ .
‘Maintenance status’
T
Turn the Rotary Switch until ‘Machine settings’ is displayed.
T Press the Rotary Switch.
‘Machine settings’
T Press the Rotary Switch.
‘Switch off after’
Language