Juplink EC3-1200 User Manual Download Page 22

Page: 22 / 28

5.2.7 Wi-Fi Protected Setup-WPS setting

This page allows you to change the settings for WPS (Wi-Fi Protected Setup). Using this
feature allows a wireless client to automatically synchronize its settings and connect to the
Range Extender in a secured manner.

①

After logging in to the Range Extender, click

Advanced

at top of the Web page.

②

Choose

Wireless

WLAN1(5GHz)

WPS Settings

Wireless

WLAN2(2.4GHz)

WPS Settings

, depending on which band you want to configure.

Note: You can enter the Client PIN Number and connect to a specific device.

5.2.8 Wireless Schedule - Green AP

This page allows you to set up the wireless schedule rule. Do not forget to configure the system
time before enabling this feature.

①

After logging in to the Range Extender, click

Advanced

at top of the Web page.

②

Choose

Wireless

WLAN1(5GHz)

Green AP

Wireless

WLAN2(2.4GHz)

Green AP

, depending on which band you want to configure.

③

Select

Enable Wireless Schedule

and set

Day

and

Time

Summary of Contents for EC3-1200





























Search results

Summary of Contents for EC3-1200

Reviews:

Related manuals for EC3-1200

Brands by name

Popular brands

Juplink EC3-1200, User Manual

Search results

Summary of Contents for EC3-1200

Reviews:

Related manuals for EC3-1200

Brands by name

Popular brands