5.2.5 Wireless Security Setup
This page allows you to set up wireless security. Using WEP or WPA Encryption Key helps
prevent unauthorized access to your wireless network.
①
After logging in to the Range Extender, click
Advanced
at top of the Web page.
②
Choose
Wireless
>
WLAN1(5GHz)
>
Security Settings
or
Wireless
>
WLAN2(2.4GHz)
>
Security Settings
, depending on which band you want to
configure.
Note: If you cannot connect to the Range Extender after modification, please try resetting to
factory defaults.
5.2.6 Wireless Access Control
If you set the control mode to Enable, only those clients whose wireless MAC addresses
are in the access control list are able to connect to the Range Extender. If Disable is
selected, wireless clients in the list are not able to connect to the Range Extender.
①
After logging in to the Range Extender, click
Advanced
at top of the Web page.
②
Choose
Wireless
>
WLAN1(5GHz)
>
Access Control
or
Wireless
>
WLAN2(2.4GHz)
>
Access Control
, depending on which band you want to configure.
③
Enter the information of the MAC address and Comment (if necessary). Then,
click
Save&Apply
.
