Chapter 4 Maintaining the Range Extender
4.1 Changing the User Name and Password of the Range Extender
You can change the user name and password to log in to the Range Extender.
①
After logging in to the Range Extender, click
Advanced
at top of the Web page.
②
Choose
Management
>
Password
.
③
Change the user name and password, and then click
Save&Apply
. Your settings
are now applied.
4.2 Saving/Reloading Settings
This page allows you to save current settings to a file or reload the settings from a file that
was saved previously. You can also reset the current configuration to factory defaults.
①
After logging in to the Range Extender, click
Advanced
at top of the Web page.
②
Choose
Management
>
Save/Reload Setting
.
③
To save current settings to a file, click
Save Settings to File
, and then save it to
your local device.
The browser extracts the configuration file from the Range Extender, and the
name of the file saved is
config.dat
by default.
To load settings from a file, click
Load Settings from File
, and then click
Upload
.
To restore to factory defaults, click
Reset
. Your Range Extende is stored to
