wiJAC2-T32
Wireless Intercom System with Transceiver Connection - 3 User - Europe
Operating Manual
Rev A
Page 11
3 Connecting the wiJAC2™ System
Note:
The
wiJAC2-T32
Wireless Intercom Dropcord System consists of one JB66-002 Headset Adapter and
up to three JB67-002 Intercom Adapters. Only paired units will operate together (see
The JB67 Intercom Adapter is connected via an adapter cable (see
) into a jack in the aircraft where
the headset dropcord is normally connected, and is then clipped to a suitable point in the aircraft.
A headset is inserted (via adapter cable CAB-HSET-0001 if required) into the jack on the JB66 Headset Adapter,
which is clipped to the user's belt or clothing.
Headset and audio panel are not included.
WARNING
:
JAC recommends that no battery-operated device should be relied upon as the sole
method of communication in cases where there is potential risk to life or limb.
Standard aviation
headset to JB66-002
JB67-002
to aircraft
intercom jack
JB66-002 Headset Adapters
(Connected to user's headsets)
JB67-002 Intercom Adapter
(Plugged in to aircraft intercom jack)
ALWAYS charge rechargeable batteries
before every use.
