wiJAC2-T32
Wireless Intercom System with Transceiver Connection - 3 User - Europe
Operating Manual
Rev A
Page 3
2.1
JB66-002 Headset Adapter (JB66)
Note
: The unit is shown in grey for clarity.
2.1.1
JB66 Controls
2.1.1.1
(ON/OFF) Button
The ON/OFF control is a push button switch marked with the
symbol and is located at the centre top of the unit
front. To turn the unit on, press the ON/OFF button once. The PWR ON annunciator will illuminate green, and the
LOW BATT annunciator will illuminate for two seconds as the JB66 starts searching for a paired JB67.
To turn the unit off, press and hold the ON/OFF button for approximately 3 seconds. (The PWR ON annunciator will
turn off and the LOW BATT annunciator will illuminate red and then turn off as the JB66 turns off, or when the
ON/OFF button is released.)
2.1.1.2
VOX
(Voice Operated Switch)
The Voice Operated Switch control is a rotary knob marked VOX located on the top right of the JB66 Headset
Adapter. To reduce the level of the sound needed to route the microphone audio to the Intercom Adapter, turn the
VOX knob counterclockwise (ccw). To increase the level of the sound needed to route the microphone audio to the
Intercom Adapter, turn the VOX knob clockwise (cw). When the control is at the detent in the fully ccw position, the
unit will be in PTT ICS mode. Adjust this setting for proper VOX operation as ambient noise levels change.
ON/OFF Control
LOW BATT
Annunciator
Battery Lid
Release
Push To Talk
Buttons
PWR ON
Annunciator
Headset Jack
VOL
(Phones Volume
Control)
VOX (Microphone
Voice Operated
Switch Control)
Belt
Clip
Product
Label
JB66 Front View
JB66 Back View
JB66 Top View
VOX
Control
VOL
Control
