JUNO JB126D5, User Manual

Page: 28 / 72

During the pyrolytic cleaning the lamp is
deactivated.
1. Remove the worst dirt manually.
2.
Clean the inner side of the door with hot
water, so that the residues do not burn
from the hot air.
3.
Activate the appliance.
4.
Set the Pyrolysis function (refer to
"Oven functions").
5. Touch .
6. Touch or to set the duration of
the cleaning procedure:
Option Description
1 1:00 h for a low
degree of dirt
2 1:30 h for a usual
degree of dirt
3 2:30 h for a high
degree of dirt
You can use the End function to delay
the start of the cleaning procedure.
7. Touch to activate the Pyrolysis
function.
Cleaning reminder
To remind you that the pyrolytic cleaning is
necessary, the cleaning reminder symbol
flashes in the display after each
deactivation of the appliance for the next 10
seconds.
The cleaning reminder goes
out:
• after the end of the pyrolytic
cleaning.
• when you deactivate it in the
basic settings. Refer to
"Using the settings menu".
Cleaning the oven door
The oven door has four glass panels. You
can remove the oven door and the internal
glass panels to clean them.
The oven door can close if you
try to remove the glass panels
before you remove the oven
door.
CAUTION! Do not use the
appliance without the glass
panels.
1. Open the door fully and hold the two
door hinges.
2. Lift and turn the levers on the two
hinges.
3. Close the oven door halfway to the first
opening position. Then pull forward and
remove the door from its seat.
28