JUNO JB126D5, User Manual

Page: 31 / 72

Problem Possible cause Remedy
The oven does not heat up. The automatic switch-off is
activated. Refer to "Automatic switch-
off".
The oven does not heat up. The Child Lock is on. Refer to "Using the Child
Lock".
The oven does not heat up. The fuse is released. Make sure that the fuse is the
cause of the malfunction. If
the fuse releases again and
again, contact a qualified
electrician.
The lamp does not operate. The lamp is defective. Replace the lamp.
The display does not show
the time during the off status. The display is deactivated.
Touch and at the
same time to activate the dis-
play again.
It takes too long to cook the
dishes or they cook too
quickly. The temperature is too low or
too high. Adjust the temperature if
necessary. Follow the advice
in the user manual.
Steam and condensation set-
tle on the food and in the
cavity of the oven. You left the dish in the oven
for too long. Do not leave the dishes in the
oven for longer than 15 - 20
minutes after the cooking
process ends.
The display shows "C3". The cleaning function does
not operate. You did not fully
close the door, or the door
lock is defective. Fully close the door.
The display shows "F102". • You did not fully close the
door.
• The door lock is defective.
• Fully close the door.
• Deactivate the oven with
the house fuse or the
safety switch in the fuse
box and activate it again.
• If the display shows
"F102" again, contact the
Customer Care Depart-
ment.
The display shows an error
code that is not in this table. There is an electrical fault. • Deactivate the oven with
the house fuse or the
safety switch in the fuse
box and activate it again.
• If the display shows the
error code again, contact
the Customer Care De-
partment.
31