Setting the DURATION
1.
Activate the appliance and set an oven
function and temperature.
2.
Touch again and again until the
display shows .
flashes in the display.
3.
Use
or
to set the minutes for
DURATION.
4.
Touch
to confirm.
5.
Use
or
to set the hours for
DURATION.
If you touch or
while
you set the DURATION, the
appliance switches to the
setting of the END function.
6.
When the set time ends, an acoustic
signal sounds for two minutes.
and time setting flash in the display. The
appliance deactivates.
7.
Touch a sensor field or open the oven
door to stop the acoustic signal.
8.
Deactivate the appliance.
Setting the END
1.
Activate the appliance and set an oven
function and temperature.
2.
Touch again and again until the
display shows .
flashes in the display.
3.
Use
or
to set the END and
or to confirm. First you set the
minutes and then the hours.
When the set time ends, an acoustic signal
sounds for two minutes. symbol and the
time setting flash in the display. The
appliance deactivates.
4.
Touch a sensor field or open the oven
door to stop the acoustic signal.
5.
Deactivate the appliance.
Setting the SET+GO
You can use the SET+GO function only
when the DURATION is set.
1.
Set an oven function (or a programme)
and temperature (refer to "Setting the
oven function" and "Changing the
temperature").
2.
Set the DURATION (refer to "Setting the
DURATION").
3.
Touch again and again until
flashes in the display.
4.
Touch
to set the SET+GO function.
The display shows and with an
indicator. This indicator shows which clock
function is activated.
5.
Touch a sensor field (apart from ON /
OFF) to start the SET+GO function.
Setting the MINUTE MINDER
Use the MINUTE MINDER to set a
countdown (maximum 23 h 59 min). This
function has no effect on the operation of
the oven. You can set the MINUTE MINDER
at any time and also when the appliance is
off.
1.
Touch .
and "00" flash in the display.
2.
Use
or
to set the MINUTE
MINDER. First you set the seconds,
then the minutes and the hours.
3.
Touch
or the MINUTE MINDER
starts automatically after five seconds.
When the set time ends, an acoustic signal
sounds for two minutes and 00:00 and
flash in the display.
4.
Touch a sensor field or open the oven
door to stop the acoustic signal.
Setting the Time delay function
The DURATION and END can be
used at the same time, if the appliance is to
be switched on and off automatically later.
In this case, first set the DURATION and
then the END function (refer to "Setting
the DURATION" and "Setting the END" ).
12
Summary of Contents for JB126D5
Page 1: ...JB126D5 User Manual Oven Benutzerin formation Backofen...
Page 71: ...71...
Page 72: ...867310718 A 492014...
