Juniper TX MATRIX PLUS, Hardware Manual

Page: 439 / 502

WARNING: Unterminated optical connectors can emit invisible laser
radiation. The lens in the human eye focuses all the laser power on the
retina, so focusing the eye directly on a laser source—even a low-power
laser—could permanently damage the eye.
TX Matrix Plus Laser Safety Standards
TXP-F13 SIBs and TXP-T1600 SIBs are equipped with laser transmitters, which are
considered Class 1M Laser Products.
The TX Matrix Plus router is classified by the following laser safety standards: Class 1M
laser product (IEC 60825-1 2001–01).
The maximum output is less than 10 mW when measured through a 3.5-mm aperture
located at a distance of 100 mm and the wavelength is 850 nm from fiber-optic array
ports.
Related
Documentation
TX Matrix Plus TXP-F13 SIB Overview on page 13
•
•
TX Matrix Plus Cables Overview on page 48
•
Fiber-Optic Array Cable Connections and Considerations on page 109
•
Connecting the Fiber-Optic Array Cables to the TX Matrix Plus Router on page 181
•
Replacing a Fiber-Optic Array Cable on page 336
•
TX Matrix Plus Laser and LED Safety Warnings on page 405
TX Matrix Plus Laser and LED Safety Warnings
• Class 1M Laser Product Warning on page 405
•
Class 1 LED Product Warning on page 406
•
Laser Beam Warning on page 406
• Radiation from Open Port Apertures Warning on page 407
• Unterminated Fiber-Optic Array Cable Warning on page 408
Class 1M Laser Product Warning
WARNING: The TX Matrix Plus router is a Class 1M laser product.
Waarschuwing Laserproducten van Klasse 1M (IEC).
Varoitus Luokan 1M (IEC) lasertuotteita.
Attention Produits laser catégorie 1M (IEC).
Warnung Laserprodukte der Klasse 1M (IEC).
Avvertenza Prodotti laser di Classe 1M (IEC).
405 Copyright © 2010, Juniper Networks, Inc.
Appendix A: TX Matrix Plus Safety and Regulatory Compliance Information