NOTE:
Do not bring the SIB online until instructed to do so.
5.
Issue the
show chassis alarms
command to display all alarms in the router.
user@host>
show chassis alarms
5 alarms currently active
Alarm time Class Description
2009-05-06 17:33:53 PDT Minor Check SIB 0
2009-05-06 17:33:51 PDT Major SIB_L - Fan Revision mismatch
2009-05-06 17:33:49 PDT Minor SIB 0 Fbr Bndls
2009-05-06 17:33:49 PDT Minor SIB 0 LOL
2009-05-06 17:31:58 PDT Minor PEM 1 Absent
Connecting a Switching Plane in an Operational T1600 Router
The fiber-optic array cables should already be connected to the TXP-F13 SIBs on the TX
Matrix Plus router. This procedure connects the fiber-optic array cables to the TXP-T1600
SIBs in the T1600 router (four for each TXP-T1600 SIB). To connect the switching planes:
1.
Attach an electrostatic discharge (ESD) grounding strap to your bare wrist, and connect
the strap to one of the ESD points on the chassis.
2.
Use the labels on the ends of the fiber-optic array cables and Table 41 on page 217 to
identify the cable that plugs into the fiber-optic array ports labeled
A
,
B
,
C
, and
D
.
3.
Remove the dust cover from the fiber-optic array ports on the TXP-T1600 SIB. Store
the dust cover in a dust-free resealable plastic bag.
4.
Remove the dust covers from the four fiber-optic array cable connectors that connect
to one TXP-T1600 SIB. Store the dust covers in a dust-free resealable plastic bag.
5.
Clean the four fiber-optic array cable connectors.
6.
Align the cable connectors labeled
A
,
B
,
C
, and
D
with the corresponding fiber-optic
array port, and carefully press each cable connector into the port until it stops. The
cable connectors and fiber-optic array ports are keyed to ensure proper mating.
7.
Optionally, you can route the cables into the rear cable management system. Pull the
latch for the cable management clamp toward you to release it. Place the fiber-optic
array cable upward into one the cable slots. Route the cable upward toward the top
of the chassis, and press it into the divider.
CAUTION:
You must maintain a minimum bend radius of 4 in. (10.2 cm)
short term, and 3 in. (7.6 cm) long term.
8.
Arrange the fiber-optic array cables so that they do not interfere with system airflow
and maintenance access.
9.
Bring the TXP-T1600 online by using one of the following methods:
•
Press and hold the
ONLINE/OFFLINE
button on the SIB faceplate for about five
seconds until the
OK
LED is lit.
Copyright © 2010, Juniper Networks, Inc.
214
TX Matrix Plus Router Hardware Guide
Summary of Contents for TX MATRIX PLUS
