Juniper QFabric QFX3008-I, Manual, Page: 419 / 472

•
Taking a 16-Port QSFP+ Front Card Offline in a QFX3008-I Interconnect Device on
page 351
•
Removing a 16-Port QSFP+ Front Card from a QFX3008-I Interconnect Device on
page 352
Rear Card LEDs on a QFX3008-I Interconnect Device
Each rear card has two LEDs on the right side of the module front panel that indicate rear
card status. See
Figure 133 on page 393 .
Figure 133: Rear Card LEDs on a QFX3008-I Interconnect Device
g050157
Rear card status LEDs
Ejector levers
Table 76 on page 393 describes these LEDs, their colors and states, and the status they
indicate.
Table 76: Rear Card LEDs on a QFX3008-I Interconnect Device
Description State Color LED
Rear card is operating normally. On steadily Green Status
The beacon feature has been enabled on
the card using the
request chassis beacon
command.
Intermittent blinking
Software is loading on the rear card. On steadily Amber
Rear card has failed and needs to be
replaced. See
“Installing a 16-Port QSFP+
Front Card in a QFX3008-I Interconnect
Device” on page 353
.
Blinking
There is no power to the rear card, or the
rear card is not fully seated in the chassis.
See
“Installing a Rear Card in a QFX3008-I
Interconnect Device” on page 358 .
Off Unlit Power
Rear card is powered on. On steadily Green
Rear card is offline. Blinking Amber
393 Copyright © 2012, Juniper Networks, Inc.
Chapter 31: Viewing QFX3008-I System Information