Juniper QFabric QFX3008-I, Manual, Page: 415 / 472

Table 71: Chassis Status LEDs on a QFX3008-I Interconnect Device (continued)
Description State Color Description
The device is powered off. Off Unlit System status
The fan trays and front and rear cards are
operating normally. On steadily Green
The beacon feature has been enabled on the
device using the
request chassis beacon
command.
Intermittent blinking
One or more fan tray or front or rear card
component failures are generating one or more
alarms. Blinking Amber
Related
Documentation
Front Panel Display of the QFX3008-I Interconnect Device on page 43
•
•
Understanding Alarms on page 437
•
request chassis beacon
Control Board LEDs on a QFX3008-I Interconnect Device
Each Control Board has three LEDs on the left side of the module front panel that indicate
Control Board status. Each SFP+ management port has two LEDs that indicate link status
and activity. See
Figure 131 on page 389 .
Figure 131: Control Board LEDs on a QFX3008-I Interconnect Device
g050155
Control board
status LEDs Status and
Link/Activity LEDs
SFP
ports
Ejector levers
Management
port
Auxiliary
port
Console
port
USB
port
Table 72 on page 390 describes these LEDs, their colors and states, and the status they
indicate.
389 Copyright © 2012, Juniper Networks, Inc.
Chapter 31: Viewing QFX3008-I System Information