Juniper QFabric QFX3008-I, Manual, Page: 240 / 472

CAUTION: QFX3100 Director devices are maximally protected inside the
shipping carton. Do not unpack the Director devices until you are ready to
begin installation.
To unpack a QFX3100 Director device (see Figure 56 on page 214 ):
1.
Move the shipping carton to a staging area as close to the installation site as possible
but where you have enough room to remove the system components.
2.
Position the carton so that the arrows are pointing up.
3.
Open the top flaps on the shipping carton.
4.
Remove the accessory box and verify the contents against the parts inventory.
5.
Pull out the packing material holding the QFX3100 Director device in place.
6.
Verify the components received against the inventory provided in Table 55 on page 214 .
7.
Save the shipping carton and packing materials in case you need to move or ship the
device later.
Figure 56: Unpacking a QFX3100 Director Device
Table 55: Inventory of Components Provided with a QFX3100 Director Device
Quantity Component
1 QFX3100 Director device
Copyright © 2012, Juniper Networks, Inc. 214
QFX3000 Hardware Documentation