You can use group-name as re0 or re1.
[edit]
root@#
set groups
group-name
interfaces em0 unit 0 family inet address
address/prefix-length
For Example:
[edit]
root@#
set groups
re0
interfaces em0 unit 0 family inet address
address/prefix-length
[edit]
root@#
set groups
re1
interfaces em0 unit 0 family inet address
address/prefix-length
10. (Optional) Configure the static routes to remote prefixes with access to the management port.
[edit]
root@#
set routing-options static route
remote-prefix
next-hop
destination-ip
retain no-readvertise
For example:
[edit]
root@#
set routing-options static route
192.168.0.0/24
next-hop
10.0.3.2
retain no-readvertise
11. (Optional) Enable Telnet service.
[edit]
root@#
set system services telnet
NOTE: When Telnet is enabled, you cannot log in to an MX10004 through Telnet using
root
credentials. Root login is allowed only for SSH access.
144
