[PR/414663]
■
If an SRX210 device receives more traffic than it can handle, node 1 either
disappears or gets disabled. [PR/416087]
■
On SRX3400, SRX3600, SRX5600, SRX5800, and J Series devices in an
active/active chassis cluster, when the fabric link fails and then recovers, services
with a short
time-to-live
(such as ALG FTP) stop working. [PR/419095]
■
On SRX5800 devices, SNMP traps might not be generated for the
ineligible-primary state. [PR/434144]
■
On SRX3400, SRX3600, SRX5600, and SRX5800 devices in chassis cluster
active/active mode, the J-Flow samplings do not occur and the records are not
exported to the
cflowd
server. [PR/436739]
■
On SRX240 Low Memory and High Memory devices, binding the same IKE policy
to a dynamic gateway and a site-to-site gateway is not allowed. [PR/440833]
■
On SRX650 devices, the following message appears on the new primary node
after a reboot or an RG0 failover:
WARNING: cli has been replaced by an updated version:
CLI release 9.6B1.5 built by builder on 2009-04-29 08:24:20 UTC
Restart cli using the new version ? [yes,no] (yes) yes
[PR/444470]
■
On SRX240 devices, the cluster might get destabilized when the file system is
full and logging is configured on JSRPD and chassisd. The log file size for the
various modules should be appropriately set to prevent the file system from
getting full. [PR/454926]
■
On SRX3400, SRX3600, SRX5600, and SRX5800 devices in a chassis cluster,
the ping operation to the redundant Ethernet interface (
reth
) fails when the cluster
ID changes. [PR/458729]
■
On SRX100 devices, after primary node reboot and cold synchronization are
finished, the chassis cluster auth session timeout age and application name
cannot synchronize with the chassis cluster peers. [PR/460181]
■
On SRX5600 devices, low-impact in-service software upgrade (ISSU) chassis
cluster upgrade does not succeed with the
no-old-master-upgrade
option when
you upgrade from JUNOS Release 9.6R2 to JUNOS Release 10.1. [PR/471235]
■
On SRX3400, SRX3600, SRX5600, and SRX5800 devices, the secondary node
displays incorrect interface status after a low-impact in-service software upgrade
(ISSU) from JUNOS Release 9.6R2 to JUNOS Release 10.1R1. [PR/482566]
■
On SRX3400 and SRX3600 devices, chassis cluster upgrades (LICU) with
no-old-master-upgrade from JUNOS Release 9.6R2.11 to 10.0R1.x and from
JUNOS Release 10.0R1.8 to 10.1x.x do not work. [PR/483485]
■
On SRX3600 devices, after you disable and enable the secondary node track,
the IP status remains unreachable. [PR/488890]
■
On SRX5600, SRX5800 devices, the shaping rate doubles during LICU upgrades
after the secondary node becomes the primary node and continues to be the
Issues in JUNOS Release 10.1 for SRX Series Services Gateways and J Series Services Routers
■
145
Issues in JUNOS Release 10.1 for SRX Series Services Gateways and J Series Services Routers
