save
reset
5.
Once the system is booted from the USB storage device, take a snapshot on
the external CompactFlash using the
request system snapshot media external
command.
NOTE:
Once the snapshot has been taken on the external CompactFlash, we
recommend you to set the
ext.cf.pref
to
0
at the U-boot prompt.
Security
■
J Series devices do not support the authentication order
password radius
or
password ldap
in the
edit access profile
profile-name
authentication-order
command.
Instead, use
order radius password
or
ldap password
.
WLAN
■
While configuring the AX411 Access Point on your SRX Series devices, make
sure to enter the WLAN admin password using the
set wlan admin-authentication
password
command. This command prompts for the password and the password
entered is stored in encrypted form.
NOTE:
■
Without wlan config option enabled, the AX411 Access Points will be managed
with the default password.
■
Changing the
wlan admin-authentication
password when the
wlan subsystem
option
is disabled might result in mismanagement of Access Points . You might have
to power cycle the Access Points manually to avoid this issue.
■
The SRX Series devices that are not using the AX411 Access Point can optionally
delete the
wlan config
option.
■
Accessing the AX411 Access Point through SSH is disabled by default. You can
enable the SSH access using the
set wlan access-point <name> external system
services enable-ssh
command.
Changes In Default Behavior and Syntax in JUNOS Release 10.1 for SRX Series Services Gateways and J Series Services
Routers
■
131
Changes In Default Behavior and Syntax in JUNOS Release 10.1 for SRX Series Services Gateways and J Series Services Routers
