edge (NPE) router goes down, causing the multitenant unit switch to switch
to the this NPE router.
NOTE:
This option has a similar effect in a VPLS multihoming environment with
multiple multitenant unit switches connected to NPE routers, where both multitenant
unit switches have pseudowires that terminate in a mesh group with local-switching
configured. If the
any-spoke
option is enabled, then both PE routers send MAC
FLUSH-FROM-ME flush messages to all PEs in the core.
■
propagate
—(Optional) Propagate MAC flush to the core.
[
VPNs
]
Related Topics
■
New Features in JUNOS Release 10.1 for M Series, MX Series, and T Series Routers
on page 6
■
Issues in JUNOS Release 10.1 for M Series, MX Series, and T Series Routers on
page 54
■
Errata and Changes in Documentation for JUNOS Software Release 10.1 for M
Series, MX Series, and T Series Routers on page 94
■
Upgrade and Downgrade Instructions for JUNOS Release 10.1 for M Series, MX
Series, and T Series Routers on page 98
Issues in JUNOS Release 10.1 for M Series, MX Series, and T Series Routers
The current software release is Release 10.1R3. For information about obtaining the
software packages, see “Upgrade and Downgrade Instructions for JUNOS Release
10.1 for M Series, MX Series, and T Series Routers” on page 98.
■
Current Software Release on page 54
■
Previous Releases on page 73
Current Software Release
Outstanding Issues in JUNOS Release 10.1 for M Series, MX Series, and T Series
Routers
Class of Service
■
On MX Series routers with Enhanced DPCs, bandwidth sharing between two
schedulers, one with high and the other with strict-high priority, might not be
as expected when the schedulers are oversubscribed. That is, only one queue
can use all of the excess bandwidth. This issue occurs when the schedulers are
configured on logical interfaces. [PR/265603]
54
■
Issues in JUNOS Release 10.1 for M Series, MX Series, and T Series Routers
JUNOS 10.1 Software Release Notes
