![Juniper JUNOS 10.1 - S REV 4 Release Note Download Page 86](http://html1.mh-extra.com/html/juniper/junos-10-1-s-rev-4/junos-10-1-s-rev-4_release-note_2032790086.webp)
■
On M7i and M10i routers, the syncer process writes to the file
/var/rundb/chassisd.dynamic.db
every 30 seconds. [PR/511901: This issue has
been resolved.]
■
Under certain circumstances, the chassisd process might crash on a backup
Routing Engine while a configuration is commited. [PR/512044: This issue has
been resolved.]
Layer 2 Ethernet Services
■
On an MX Series router, the DHCP ACK messages are dropped when a client
Rebind request is processed by a different DHCP server. This issue may occur
in an environment where the provider has multiple DHCP servers for redundancy
purposes. [PR/487138: This issue has been resolved.]
■
The family ISO MTU configured explicitly under the IRB interface logical unit will
decrement by three if you change the interface MTU on the interface that belongs
to the same bridge domain. [PR/493209: This issue has been resolved.]
■
In JUNOS Release 10.0, the MX 960 router displays the following i2c messages
related to the fan:
rocky-re0 /kernel: PCF8584(WR): target ack failure on byte 0
rocky-re0 /kernel: PCF8584(WR): (i2c_s1=0x08, group=0xe, device=0x54)
This is a cosmetic issue and has no impact on the router. [PR/500824: This issue
has been resolved.]
Network Management
■
Under certain SNMP conditions, the following log message is displayed:
M10i-RE0 pfed: PFED_NOTIF_GLOBAL_STAT_UNKNOWN: Unknown global
notification stat: transit options/ttl-exceeded (re-injected)
M10i-RE0 pfed: PFED_NOTIF_STAT_UNKNOWN: Unknown notification type stat:
Unknown
This log message might also be displayed during the installation of AI Scripts
(version 2.1R2 or above) on the router. AI Scripts versions prior to 2.1R2 do not
cause these messages. This is a cosmetic message, and does not have any impact.
[PR/427590: This issue has been resolved.]
■
When
monitor traffic matching x
is used on RLSQ bundles, no outbound packets
are displayed. [PR/468959: This issue has been resolved.]
■
The SNMP MIB walk on jnxFWCounterDisplayName may miss certain policer
counters of firewall filters applied with respect to logical interfaces (subinterfaces).
[PR/485477: This issue has been resolved.]
■
Under certain conditions, the SNMPD crashes due to a BAD_PAGE_FAULT.
[PR/496351: This issue has been resolved.]
86
■
Issues in JUNOS Release 10.1 for M Series, MX Series, and T Series Routers
JUNOS 10.1 Software Release Notes