Juniper IDP 250, Installation Manual

Page: 21 / 68

IDP Sensors
„ 7
Chapter 2
Hardware Overview
This chapter provides detailed descriptions of the Juniper Networks IDP sensors
and their components.
This chapter has the following sections:
„
IDP Sensors on page 7
„ Traffic Ports (Forwarding Interfaces) on page 10
„ Management Ports on page 13
„ Hard Drives and USB Ports on page 13
„
Power Supplies on page 13
„ IDP Sensor LEDs on page 14
IDP Sensors
This section provides an overview of the following IDP sensors:
„ IDP 75 Sensor on page 8
„ IDP 250 Sensor on page 8
„ IDP 800 Sensor on page 8
„ IDP 8200 Sensor on page 9
Each sensor contains a USB port you can use for reimaging the sensors.
CAUTION: Both the console serial port and the management network interface
port use the same RJ-45 connector. Do not plug a network cable into the console
serial port.