6
Operating the truck without its own drive system
WARNING!
Accidental truck movement
When the brakes are de-activated the truck must be parked on a level surface, since
the brakes are no longer effective.
u
Do not release the brake on slopes or inclines.
u
Do not park the truck with the brake released.
u
Apply the brake again when you reach your destination.
Releasing the brake
Tools and Material Required
– Two M5x45 screws
– Spanner wrench
Procedure
• Switch off the truck, to do this:
• Turn the key in the key switch (6) anti-clockwise as far as it will go. Remove the
key from the key switch (6).
• For CanCode (8)(
o
) press the O key.
• Press the red button on the ISM access module(
o
).
• Press the Emergency Disconnect switch (12).
• Disconnect the battery.
• Use wedges to prevent the truck from moving.
• Remove the drive compartment cover, see page 135.
• Insert two M5x45 screws (66) as far as the stop and lift up the anchor plate.
The brake is now released. The truck can be moved.
6,8
12
66
92
10.19 en-GB
Summary of Contents for ESD 220
