Jungheinrich ESD 220, Operating Instructions Manual

Page: 88 / 186

4.8.1 Raising a load
Requirements
– Load correctly palletised.
– Load weight matches the truck's
capacity.
– Load handler evenly loaded for
heavy loads.
Procedure
• Drive the truck carefully up to the
pallet.
• Drive the load handler slowly into
the pallet until the pallet is against
the back of the load handler (see
graphic to the right).
Z
The load must not extend by more
than 50 mm beyond the load
handler tips.
• Raise the load handler until the
desired height is reached, (see
page 83).
The load is being raised.
NOTICE
Risk of material damage to the hydraulic unit
When the mechanical stops of the load handler have been reached, release the
"raise load handler" button. Otherwise the hydraulic unit may suffer material damage.
86
10.19 en-GB