31
11
.1
4
E
N
3
Using the Truck for the First Time
WARNING!
The use of unsuitable energy sources can be hazardous
Rectified AC current will damage the assemblies (controllers, sensors, motors etc.)
of the electronic system.
Unsuitable cable connections (too long, insufficient wire cross-section) to the battery
(tow cables) can overheat, setting the truck and battery on fire.
X
The truck must only be operated with battery current.
X
Cable connections to the battery (tow leads) must be less than 6 m long and have
a minimum cross-section of 50 mm².
NOTE
Do not lift loads if the truck is operated via a tow lead with an external battery.
NOTE
Cold store trucks
X
Trucks designed for use in cold stores have a cold store hydraulic oil and a
protective frame instead of a mast guard on the mast.
X
If a truck with cold store oil is used outside the cold store, the lowering speeds may
increase.
Procedure
• Check the equipment is complete.
• If necessary, install the battery, see "Battery removal and installation" on page 39.
Do not damage the battery cable.
• Charge the battery, see "Charging the battery" on page 37.
Z
The truck settings must match the battery model (if the customer is charging the
battery).
• Check the hydraulic oil level and top up if necessary (see "Checking the hydraulic
oil level" on page 117).
• Start up the truck (see "Preparing the truck for operation" on page 51).
Truck is operational.
Summary of Contents for ESC 316
