117
11
.1
4
E
N
4.5
Checking the hydraulic oil level
Checking the hydraulic oil level and
replenishing
Requirements
– Fully lower the load handler.
– Prepare the truck for maintenance and repairs,
see "Preparing the truck for maintenance and
repairs" on page 112.
Procedure
• Remove the drive compartment cover, see
page 116.
• Check the oil level in the hydraulic
reservoir (97).
Z
The hydraulic reservoir (97) has four
markings (96). The hydraulic oil level should be
above the "1" marking when the load handler is
fully lowered.
• Add hydraulic oil if necessary:
Z
For the first filling approximately 0,6 l more
hydraulic oil should be added.
• Turn the lid (95) anti-clockwise from the
hydraulic reservoir (97).
• Add hydraulic oil of the correct grade until it
lies above the "1" mark level (see
"Consumables" on page 111).
• Turn the lid (95) clockwise on the hydraulic reservoir (97).
• Fit the drive compartment cover, see page 116.
• To restore the industrial truck to service after maintenance or repair work, see
"Restoring the truck to service after decommissioning" on page 122.
The hydraulic oil level is now checked.
Z
If a leak is discovered in the hydraulic system (cylinder; unions, lines), the truck
must be decommissioned and repaired by specialist personnel.
95
96
97
Summary of Contents for ESC 316
