4.12.2
Operating the lift mechanism with the Multi Pilot
Lifting and lowering
Requirements
– To prepare the truck for operation, see
Procedure
• Pull the Multi-Pilot (126) in direction H to raise
the load.
• Push the Multi Pilot (126) in direction S to
lower the load.
The load is now raised / lowered.
H
S
126
Z
When the limit position for the operation has been reached (there will be a noise
from the pressure relief valve) release the lever. The lever will revert automatically to
neutral.
Tilting the mast forward / backward
Requirements
– Truck prepared for operation, see page 86.
Procedure
• Push the Multi-Pilot lever (126) in direction V
to tilt the mast forward.
• Push the Multi-Pilot lever (126) in direction R
to tilt the mast back.
The mast is now tilted back / forward.
V
R
126
Z
When the limit position for the operation has been reached (there will be a noise
from the pressure relief valve) release the lever. The lever will revert automatically to
neutral.
105
10.20 en-GB
Summary of Contents for EFG 110
