5.5
Replacing wheels
WARNING!
A truck tipover can cause accidents
In order to raise the truck, use only suitable lifting gear at the points specially
provided for this purpose.
u
Note the weight of the truck on the data plate.
u
Always use a jack with a minimum capacity of 2500 kg kg.
u
Raise the unladen truck on a level surface.
u
When raising the truck, take appropriate measures to prevent it from slipping or
tipping over (e.g. wedges, wooden blocks).
WARNING!
Falling wheels can cause injury
u
The wheels of the truck are very heavy. A single wheel can weigh up to 150 kg.
u
Always replace wheels with a suitable tool and protective equipment.
Removing the wheels
Requirements
– Prepare the truck for maintenance and repairs
Tools and Material Required
– Jack
– Hard wooden blocks
– Mounting lever
– Torque wrench
Procedure
• Place the jack against the contact point.
Z
Jack contact point, see page 30.
• Raise the truck.
• Support the truck with hard wooden blocks.
• Undo the wheel attachment (146).
• Remove the wheel, using a suitable mounting lever if necessary.
The wheel has now been removed.
146
153
10.20 en-GB
Summary of Contents for EFG 110
