Function
Light, unused
Basic setting: Light
Light
The channel is integrated for
the "Lighting" central function
in the
eNet SMART HOME
app
.
Unused
The channel is not displayed
in the
eNet SMART HOME
app
and is disabled for use in
the commissioning interface.
Operating mode
Normal operation
Continuous on
Continuous off
Basic setting: Normal
Operation
Normal operation
The output can be operated
with radio transmitters and the
Prog
button.
Continuous on
The output switches to
continuously "On". All
operations of radio
transmitters and the
Prog
button are ignored.
Continuous off
The output switches to
continuously "Off". All
operations of radio
transmitters and the
Prog
button are ignored.
Advanced device settings
Parameters
Setting options, Basic
setting
Explanations
Manual commissioning
On, Off
Basic setting: On
Blocks manual commissioning
for the device channel.
Note: In the "Off" setting, the
device cannot be reset to the
factory setting.
Repeater mode
On, Off
Basic setting: Off
In addition to its other
functions, the device can be
used as a repeater. In the
"On" setting, the device
repeats all the received
telegrams.
Channel settings
Parameters
Setting options, Basic
setting
Explanations
Switch-on brightness
1...100 %
Basic setting: 100 %
During brief operation, the
output switches on at the set
switch-on brightness.
Note: If the value is above the
set maximum brightness or
below the minimum
brightness, then the system
will switch to the appropriate
limit value.
6/12
82581023
J0082581023
29.03.2017
eNet radio push-button controller 1-10 V 1-gang mini
