eNet radio push-button controller 1-10 V 1-gang mini
eNet radio push-button controller 1-10 V 1-gang mini
Art. No. : FMST50UP
Operating instructions
1 Safety instructions
Electrical devices may only be mounted and connected by electrically skilled
persons.
Serious injuries, fire or property damage possible. Please read and follow manual fully.
Danger of electric shock. Always disconnect before carrying out work on the devise or
load. In so doing, take all the circuit breakers into account, which support dangerous
voltages to the device and or load.
Danger of electric shock. Device is not suitable for disconnection from supply voltage.
These instructions are an integral part of the product, and must remain with the end
customer.
2 Device components
Figure 1: Device components
(1) Operating mode switch
(2) Button
Prog
(3) Status LED
(4) Measuring points for voltage measurement, terminals rear-mounted
3 Function
Intended use
-
Switching and brightness setting of luminaires with 1-10 V interface
-
Operation with suitable radio transmitters
-
Mounting in appliance box according to DIN 49073 in combination with a suitable cover
-
Installation in surface-mounted housing or panel-mounted housing (accessories) for
suspended ceilings
Product characteristics
-
Switch-on brightness can be saved permanently
-
Minimum brightness can be saved permanently
1/12
82581023
J0082581023
29.03.2017
