i
The maximum transmission time is 12 s, even if another connected button is pressed
afterwards.
Teach-in transmitter
For a receiver to understand a radio telegram from a transmitter, the receiver must "learn" this
radio telegram. A transmitter channel can be taught into any number of receivers. The teaching
process only creates an allocation in the receiver.
On teaching a transmitter, the receiver range is reduced to approx. 5 m. The distance between
the receiver and the transmitter to be taught should therefore be between 0.5 m and 5 m.
Teach transmitter in operating mode 1 or 2
Microswitches are set to operating mode 1 or 2.
o
Switch the receiver to Programming mode (see transmitter instructions).
o
Press the button of the desired input for at least 1 s.
With two-area modes, actuate only one button per channel.
o
Exit the Programming mode of the receiver (see transmitter instructions).
Transmitter has been taught-in.
Teach transmitter in operating modes 3 or 4
o
Set the microswitch to 00000.
o
Switch the receiver to Programming mode (see transmitter instructions).
o
Press the connected switch of the desired input for at least 1 s.
o
Set the microswitch to the required mode 3 or 4.
o
Exit the Programming mode of the receiver (see transmitter instructions).
Transmitter has been taught-in.
Teach transmitter in operating modes 5 to 8
Microswitches are set to one of the operating modes 5 to 8.
o
Switch the receiver to Programming mode (see transmitter instructions).
o
Depending on the selected function, actuate the light scenes button for at least 3 s or
actuate the All On or All Off button for at least 10 s.
i
When teaching in a light moods button, the All On and All Off button is also taught in
automatically in the receiver.
o
Exit the Programming mode of the receiver (see transmitter instructions).
Transmitter has been taught-in.
Deleting a transmitter
o
Teach-in the transmitter to be deleted again in the same operating mode.
Changing the All On / All Off function
i
This function is only available in operating modes 5 to 7.
The All On / All Off function is automatically taught in on teaching in the transmitter. The
function must be changed if receivers are not to react to the All On / All Off function.
Example: a receiver should not react to the All On function, all the other receivers should switch
the light on.
o
Press the All On button for at least 1 s.
All the taught in receivers are switched on.
o
Set the lighting in the way it should react when the All On button is pressed, i.e. as all the
receivers are switched on, now, for example, switch off the light in the bathroom.
o
Press the All On button for at least 10 s.
Firstly, open the old lighting setting. Do not release the button. After about 10 s the new
setting is saved and activated.
The reallocation of the All On button is complete. Proceed in the same manner to change
the All Off button.
9/11
32535013
J:0082535013
13.08.2010
Radio Management
Radio multifunction transmitter
