picture 9
With the microswitch setting 00110 shown in the figure, operating mode 4 is set (picture 9).
o
Use a small screwdriver to set the appropriate operating mode (see following table).
Operating mode/
microswitch
Function
Control
1
00000
Switching/Dimming
Button
2
00010
Switching/Dimming/Blind
Button
2-button
3
00100
Switching
Switch, NO contact
4
00110
Switching
Switch, NC contact
5
01000
All On/Off, light scene 1/2
Button
6
01001
All Off, light scene 1-3
Button
7
01010
All Off, light scene 3-5
Button
8
01011
Light scene 1-4
Button
Implementing the "Bell mode" application example
In "Bell mode", a load, e.g. a bell or a lamp, is switched on for the time the button is pressed.
With a switching actuator as a receiver:
o
Set operating mode 3.
o
Connect a button instead of a switch.
When the button is pressed, the switching actuator closes its contact and releasing the
button reopens the contact.
With a touch actuator as a receiver:
o
Set operating mode 2.
o
Actuate the switch-on channel
E1
or
E3
.
The behaviour of the touch actuator is described in the touch actuator operating manual.
8/11
32535013
J:0082535013
13.08.2010
Radio Management
Radio multifunction transmitter
