eNet radio dimming actuator 1-gang mini
6
Parameter list
The device parameters can be changed with the eNet server:
Device and channels
Parameters
Setting options, Basic setting
Explanations
Function
Light, unused
Basic setting: Light
Light
The channel is integrated for
the "Lighting" central function
in the eNet SMART HOME
app.
Unused
The channel is not displayed
in the eNet SMART HOME
app and is disabled for use in
the commissioning interface.
Operating mode
Normal operation
Continuous on
Continuous off
Basic setting: Normal Opera-
tion
Normal operation
The output can be operated
with radio transmitters and the
Prog button.
Continuous on
The output switches to con-
tinuously "On". All operations
of radio transmitters and the
Prog button are ignored.
Continuous off
The output switches to con-
tinuously "Off". All operations
of radio transmitters and the
Prog button are ignored.
Advanced device settings
Parameters
Setting options, Basic setting
Explanations
Manual commissioning
On, Off
Basic setting: On
Blocks manual commissioning
for the device channel.
Note: In the "Off" setting, the
device cannot be reset to the
factory setting.
Repeater mode
On, Off
Basic setting: Off
In addition to its other func-
tions, the device can be used
as a repeater. In the "On" set-
ting, the device repeats all the
received telegrams.
Channel settings
Parameters
Setting options, Basic setting
Explanations
Switch-on brightness
1...100 %
Basic setting: 100 %
During brief operation, the out-
put switches on at the set
switch-on brightness.
Note: If the value is above the
set maximum brightness or
below the minimum bright-
7 / 16
82580733
14.10.2019
J0082580733
