eNet radio dimming actuator 1-gang mini
Connect 600 Watt LED lamps or compact fluorescent lamps at most per 16 ampere circuit
breaker. When connecting transformers, observe the data of the transformer manufac-
turer.
Our dimmers take into account the different electronic characteristics of most LED lamps
found on the market. However, it cannot be guaranteed that in individual cases the de-
sired results may not be achieved.
Figure 2: Clampable conductor cross-section
￭
Connect the load according to connection diagram (Figure 1).
￭
Insert the actuator in the appliance box in such a way that the Prog button (2) and Status
LED (3) are visible.
Figure 3: Operating mode switch
Switch position
Function/connectable loads
PC
Dimming principle and parameter set with eNet Server.*)
R,L,C
Universal
Automatic calibration to the load, leading edge phase control
or trailing edge phase control. Connection of incandescent
lamps, HV halogen lamps, electronic transformers for halo-
gen or LED lamps or dimmable inductive transformers for
halogen or LED lamps.
HV-
|
LED leading edge phase control
Setting for incandescent lamps, HV halogen lamps, elec-
tronic transformers with halogen or LED lamps that can be
dimmed according to the trailing edge phase control principle
or dimmable HV-LED or compact fluorescent lamps that can
be dimmed according to the leading edge phase control prin-
ciple. The connection of inductive transformers is not permit-
ted.
HV-
{
LED trailing edge phase control
Setting for incandescent lamps, HV halogen lamps, elec-
tronic transformers with halogen or LED lams that can be
dimmed according to the trailing edge phase control prin-
ciple, dimmable HV-LED or compact fluorescent lamps that
can be dimmed according to the trailing edge phase control
principle. The connection of inductive transformers is not per-
mitted.
min.
Setting of the minimum brightness
*)
If the operating mode switch is turned from the position PC, the operating mode and
parameters are set to the default setting. The settings made with the eNet Server will
be lost.
When setting the minimum brightness, the parameter settings remain unchanged.
￭
Set the operating mode switch.
￭
Switch on mains voltage.
3 / 16
82580733
14.10.2019
J0082580733
