eNet radio dimming actuator 1-gang mini
Figure 4: Connected load
If the operating mode is set to HV-
{
LED trailing edge phase control, the maximum
connected load for LED lamps increases to typ. 200 W.
Mixed load
ohmic-inductive
20 ... 250 VA
ohmic-capacitive
20 ... 250 W
capacitive-inductive
not permitted
Ohmic and HV LED
typ. 3 ... 70 W
Ohmic and compact fl lamp.
typ. 3 ... 70 W
Power specifications including transformer power dissipation.
Operate inductive transformers with at least 85% nominal load.
For ohmic-inductive mixed load, maximum 50% proportion of ohmic load. Otherwise in-
correct calibration of the dimmer may result.
Power reduction
per 5°C in excess of 45°C
-5%
when installed in wooden or dry construction walls
-15%
when installed in multiple combinations
-20%
Power boosters
See power booster instructions
Total length power cable
max. 100 m
Dimensions Ø×H
53×28 mm
Radio frequency
868.0 ... 868.6 MHz
Transmission capacity
max. 20 mW
Transmitting range in free field
typ. 100 m
Receiver category
2
6 / 16
82580733
14.10.2019
J0082580733
