Jumper JPD-ES200, Instruction Manual

Page: 7 / 80

Device for massage leads to body and mind relaxation during or after work.
Product structure and composition
It is mainly composed of TENS Therapy Device main unit, electrode connection
wire, self-adhesive electrode pad and dry battery.
Intended use:
For low-frequency electric pulse treatment on human acupoints.
Scope of application:
For adjuvant treatment of pain and arthralgia such as back pain, neural paralysis
and muscle pain.
Product features:
1. Five treatment modes switchable on the TENS Therapy Device;
2. Tailored pain therapy with 6 pain points (shoulder, hand, joint, abdomen, waist
and leg);
3. Dual-channel treatment available for two people at the same time;
4. Adjustable intensity of treatment at any time;
5. Fall-off alarm for electrode pad, followed by automatic suspension of treatment.
6. Automatic shutdown in case of no-operation within 2 minutes except working
state, more energy efficiency.
7. Exquisite and compact appearance, light weight and portability;
8. Low battery indication, alarm indication for replacing battery in time.
Install the therapy device and connect to the treatment sites:
Tear open the electrode wire transparent plastic bag and take out one electrode
wire; tear open the electrode pad transparent plastic bag and take out two electrode
pads; connect both heads of the electrode wire with the electrode pads, and then
connect the TENS Therapy Device with the electrode wire.Remove the protective
films on the electrode pads and stick the adhesive surface on the treatment sites
such as the waist and other sites of the human body, and keep the electrode sheet in
close contact with the skin; after use, stick the protective films back for the next
use.