JUMO LOGOSCREEN cf, Interface Description

Page: 6 / 32

1 Introduction
6
1.2 Typographical conventions
1.2.1 Warning signs
The signs for Danger and Caution are used in this manual under the following
conditions:
1.2.2 Note signs
1.2.3 Presentation
V
Danger This symbol is used when there may be danger to personnel if
the instructions are disregarded or not followed correctly!
!
Caution This symbol is used when there may be damage to equipment
or data if the instructions are disregarded or not followed cor-
rectly!
E
Caution This symbol is used where special care is required when han-
dling components liable to damage through electrostatic dis-
charge.
H
Note This symbol is used when your attention is drawn to a special
remark.
"
Reference This sign refers to further information in other handbooks,
chapters or sections.
abc
1 Footnote Footnotes are notes which refer to certain points in the text.
Footnotes consist of two parts:
Marking in the text and the footnote text.
The markings in the text are arranged as continuous super-
script numbers.
The footnote text (in smaller typeface) is placed at the bottom
of the text and starts with a number and a full stop.
0x0010 Hexadecimal
number A hexadecimal number is identified by being preceded by a
“0x” (here: 16 decimal).