JUMO LOGOSCREEN cf, Interface Description

Page: 7 / 32

7
2 General
2.1 Applications
The LON interface is available for the connection of external modules of the
JUMO mTRON automation system, in order to expand the functionality of the
paperless recorder.
All mTRON modules can be connected.
2.2 System requirements
The following requirements have to be met for the connection of external mo-
dules to the recorder :
- Paperless recorder with LON interface
- Configured modules of the JUMO mTRON automation system
2.2.1 Configuring the mTRON modules
The mTRON modules are configured using the JUMO mTRON-iTOOL project
design software. A setup interface is required for connecting mTRON modules
to a PC.
H
The JUMO mTRON-iTOOL project design software can only be
dispensed with if the mTRON modules have been configured by
JUMO GmbH & Co. KG prior to delivery. In order for this to happen,
the customer must have specified the required configuration in de-
tail when ordering his measuring system.
H
The recorder can also operate without internal (built-in) analog
channels. In this case, the measurements are obtained exclusively
from the mTRON modules.