JUMO LOGOSCREEN cf, Interface Description

Page: 26 / 32

5 JUMO mTRON-iTOOL project design software
26
Transferring the
project The following steps have to be carried out before all settings can be transfer-
red from the project design software to the recorder and the mTRON modules.
1. The button is used to establish the on-line connection to the modules.
2. Using the button, all modules that are physically available are
entered within the project design software.
3. The button is used to assign the modules that are physically
available to the software modules.
The project can now be transferred to the modules. The menu Network is
available for this purpose.
A check has first to be carried out using the function Network
r
Compile. Only
when the check has been successfully completed, can the project be transfer-
red to the individual modules with the aid of the Network
r
Download
function.