JUMO LOGOSCREEN cf, Interface Description

Page: 23 / 32

23
5 JUMO mTRON-iTOOL project design software
5.6 Project design example
The JUMO mTRON-iTOOL project design software must be used if no confi-
gured mTRON modules are available, or if these have to be reconfigured.
When operating the software it is essential to follow a defined path.
- Selection of the software module from the module library
- Configuration of the mTRON modules
- Binding of the input and output network variables
- Transfer of project to the modules (download)
Selection of
the software
modules
The modules available in the module library can be dragged into the working
area by keeping the left mouse button pressed down (drag & drop). Each mo-
dule can subsequently have a name assigned.