JUMO flowTRANS US W02, Brief Instructions

Page: 43 / 48

43
12 Shutdown
12 Shutdown
12.1 Uninstalling the device
Requirements:
• Switch off the plant's voltage and secure it so that it cannot switch on again.
• Stop medium circulation in the plant.
• Drain and flush the pipe.
• Wear suitable protective equipment.
• Provide a clean and dry storage area.
1. Manually loosen the union nut of the connecting cable from the M12 plug connection on the device.
When using the connection cable provided by the manufacturer, loosen the union nut with an SW13
open-end wrench.
2. Pull the connecting cable out of the M12 plug connection and remove from the working area.
3. Manually loosen the union nuts from the process connections on the device and slide over the ends
of the pipe.
4. CAUTION! Make sure that the O-rings remain in the sealing ring grooves of the process connections
of the device.
Carefully remove the device from the plant and put in a clean and dry place.
12.2 Returning devices
Requirements:
• Clean the device housing  "Cleaning device housing", Page 42.
• Clean the parts that come into contact with the medium  "Cleaning parts that come into contact with
the medium and replacing O-rings", Page 42.
• Decontaminate the device  "Decontaminating the device", Page 42.
1. The supplementary sheet for product returns (http://productreturn.jumo.info) must first be completed
correctly and signed. Then enclose it with the shipping documents and attach it to the packaging,
ideally on the outside.
2. Use the original packaging or a suitably secure container for sending the device.
12.3 Disposal
Requirements:
• Clean the device housing  "Cleaning device housing", Page 42.
• Clean the parts that come into contact with the medium  "Cleaning parts that come into contact with
the medium and replacing O-rings", Page 42.
• Decontaminate the device  "Decontaminating the device", Page 42.
DISPOSAL
Devices and/or replaced parts should not be placed in the trash at the end of their service life as they
consist of materials that can be recycled by specialist recycling plants.
Dispose of the device and the packaging material in a responsible and environmentally friendly manner.
For this purpose, observe the country-specific laws and regulations for waste treatment and disposal.