JUMO flowTRANS US W02, Brief Instructions

Page: 14 / 48

4 Technical data
14
4.3.2 Digital output
Switching output
Pulse output
Type Transistor output as switching output or pulse output (I/O Pin 1 only)
Protection Against polarity reversal, short circuiting and overload
Output signal Push-pull, PNP, NPN
Ampacity ≤ 200 mA
Voltage drop ≤ 3 V
Function
Output signal Limit value switch, batch active, batch error, device error
Limit value monitoring function
Input signals Flow, temperature or pressure (optional)
Configuration Hysteresis (NO contact/NC contact), window (NO contact/NC contact), switch-
on and switch-off delay
Switching points
For hysteresis function Configurable
For window function Configurable
Switch-on and switch-off delay 0 to 100 s
Function Output of the flow process value
Pulse frequency 0 to 10 kHz
Duty cycle 50%
Output value at nominal width Pulses per unit (configurable)
DN 15 (Low-flow calibration) 10000
DN 15 4800
DN 20 2850
DN 25 1875
DN 32 1150