JUMO flowTRANS US W02, Brief Instructions

Page: 33 / 48

33
9 Configuration
Input/output 1
Input/output 1 > IO-Link
Input/output 1 > analog output 1
Totalizer cm³, l, m³, ft³, us-
gal, imp.gal l System unit for these parameters.
Temperature °C, °F C Unit for this parameter in the process value
display
The output signal is always output in °C re-
gardless of this setting.
Parameter Value Default setting Description
Parameter Value Default setting Description
I/O Pin 1 IO-Link, analog
output, digital out-
put IO-Link Parameter function.
Parameter Value Default setting Description
Application-spe-
cific marking JUMO
flowTRANS US
W02 TAG designation (text input with max. 32
characters possible).
System designa-
tion *** TAG designation (text input with max. 32
characters possible).
Location identifi-
cation code *** TAG designation (text input with max. 32
characters possible).
Process data for-
mat Floating point,
whole number Floating point IO-Link output format of process data.
Activate event Inactive; Process
Data (PD) invalid;
Device (D) defec-
tive; D defective &
PD invalid; Appli-
cation-spec.
Events (AE); AE
& PD invalid; AE
& D defective; AE,
D defective & PD
invalid Inactive Events are passed on to the IO-Link master.
Determine measures on an application-spe-
cific basis.
Parameter Value Default setting Description
Function Inactive, current
output, voltage
output Current output Parameter function.
Parameter
I/O Pin 1 must be configured as
an analog output .
Output signal Flow, tempera-
ture, pressure Flow Parameter output signal.
Scaling start Input range: 0.000 Process value for the current output (4 mA)
or the voltage output (0 V).
-99999 to 99999
Scaling end Input range:
Max
device mea-
suring range
Process value for the current output (20 mA)
or the voltage output (10 V).
-99999 to 99999