JUMO dTRANS p33, Operating Manual

Page: 56 / 136

3 Identifying the device version
10
(4) Process connection
502 G 1/4 to DIN EN 837
504 G 1/2 to DIN EN 837
511 1/4-18 NPT to DIN EN 837
512 1/2-14 NPT to DIN EN 837
523 G 1/2 to DIN 3852-11
567 Level probe: G 1/4 internal
571 G 3/4 front-flush to DIN EN ISO 228-1
574 G 1/2 front-flush with 2× seal
575 G 3/4 front-flush with 2× seal
576 G 1 front-flush with 2× seal
603 Taper socket with union nut to DIN 11851, DN 20 (dairy pipe fitting)
604 Taper socket with union nut to DIN 11851, DN 25 (dairy pipe fitting)
605 Taper socket with union nut to DIN 11851, DN 32 (dairy pipe fitting)
606 Taper socket with union nut to DIN 11851, DN 40 (dairy pipe fitting)
607 Taper socket with union nut to DIN 11851, DN 50 (dairy pipe fitting)
612 Clamping socket to DIN 32676, DN 10/15/20
613 Clamping socket to DIN 32676, DN 25/32/40, certified according to EHEDG
616 Clamping socket to DIN 32676 (2“ ISO 2852), DN 50, certified according to EHEDG
652 Tank connection with union nut, DN 25
658 Level probe: connection closed underneath
659 Level probe: connection open underneath
685 VARIVENT connection, DN 32/25, certified according to EHEDG
(5) Material of process connection
20 CrNi (stainless steel)
(6) Electrical connection
12 Attached cable, screened
36 Round plug M12 × 1
61 Cable socket to DIN EN 175301-803, form A
75 Terminal head
(7) Filling medium for measurement system
0 None
1 Silicone oil
(8) Calibration certificate
j With
n None (standard)
(9) Extra code
000 None
240 EAC Ex approval
406 Level probe: IP68 protection, attached cable, class 2G, zone 1
407 Level probe: IP68 protection, attached cable, class 1G, zone 0
452 Parts in contact with the medium electro-polished
634 TAG number
954 Technical passport