JUMO dTRANS p02, Operating Instructions Manual

Page: 9 / 64

7
3 Delivery package
Operating
Instructions
B 40.4385 These operating instructions are a comprehensive guide for the installation,
electrical connection, commissioning, operation and parameterization of the
JUMO dTRANS p02 pressure transmitter.
JUMO
calibration
certificate A JUMO calibration certificate and a setup print-out comes with each pressure
transmitter. These documents contain information on the parameter settings
and/or the measured characteristic data for the transmitter concerned.
If this calibration certificate is lost, or should you need an additional one, it can
be ordered from JUMO stating the serial No. of the pressure transmitter (see
nameplate),
➩
see addresses of suppliers on the back of the operating instructions
Setup
program All the parameters of the transmitter can be conveniently checked and
adjusted by using the setup program. Furthermore, additional functions are
available such as:
- recording of measurements
- graphical display of temperature and pressure
- comprehensive diagnostic messages
- indication of the complete order code and instrument configuration
(for repeat orders).
The setup program is available on request, at extra cost,
Sales No. 40/00365072.
HART
®
modem The HART
®
modem serves to connect the JUMO dTRANS p02 to a PC. The
HART
®
modem is available on request, at extra cost,
Sales No. 40/00345666.
Power supply A supply unit with a supply isolator is available on request, at extra cost,
Sales No. 40/00389710.
All manuals and user guides at all-guides.com